Duct axial fans available with long and short case, suitable to extract air in commercial and industrial where high performances combined with strength, durability and corrosion resistance are requested, such as industrial kitchens, sports halls, warehouses, factories, schools, cooling towers, airports, in the naval and agricultural field, etc.
Duct axial fans available with long and short case, suitable to extract air in commercial and industrial where high performances combined with strength, durability and corrosion resistance are requested, such as industrial kitchens, sports halls, warehouses, factories, schools, cooling towers, airports, in the naval and agricultural field, etc.
Fan casing constructed from a single sheet, roll formed and welded, with both motor and axial impeller mounted within the length of the unit casing
Casing made from reinforced, bent, welded and hot-dip galvanised steel in compliance with BS EN ISO 1461:2009 after fabrication and drilled to BS ISO 6580:2005
Adjustable pitch aerofoil impellers provided with blades made from high quality pressure die cast aluminium (LM6).
Hubs manufactured from die cast aluminum alloy (LM24).
Dynamically balanced impellers to ISO 14694 Grade G6.3.
Totally enclosed motors, with sealed for life ball bearings, efficient class IE2 or IE3, IP55 protection degree, Class F or H insulation to the EN 60034-5. N.B. IE2 motors with nominal rated power between 0,75kW and 375kW must be used with speed controller.
Electrical connection to the motor provided by IP55 terminal box mounted on the outside of the unit casing.
All metal fan casing and guard provide a long lasting and robust construction.
Wide range available:
– from 250mm to 2000mm diameter
– 2,4,6 or 8-pole motors
– single-phase or three-phase motors
Impellers are factory set an angle to provide maximum performance.
Fans are suitable for operating temperatures up to +54°C (check requested model).
Tested to the latest standards, meaning accurate, up to date information on electrical safety, performance and noise level that can be relied upon.
Designed and manufactured in accordance with Machine Directive (MD), Low Voltage Directive (LVD), Electromagnetic Compatibility Directive (EMC).
